How to Cut a 60 Degree Bevel on a Table Saw? 4 Easy Steps

Woodcutting is more complex than it seems to be. You must be proficient and learn various techniques to cut a wood piece professionally. In this article, we will show you one of those techniques and tell you how to cut a 60 degree bevel on a table saw.

You can’t do bevel cutting with a simple process as you do in any of your tasks. It would help if you were more focused and active in dealing with a wood piece in a specific position in front of you. Let’s look at the method of cutting a bevel using a table saw.


To cut a 60 degree bevel on a table saw, you need to do some mathematics to determine the correct blade placement. Subtract 45 from 60 to find the required angle. Choose the right blade based on the wood’s properties and hardness, and ensure proper placement of the wood against the blade teeth. Finally, raise the blade to the top of the wood and start cutting, taking necessary precautions to ensure safety throughout the process.

What is a Bevel Cut?

You may not have noticed this kind of position if you are new to this field. Many people cut the wood by placing it at an angle of 90 degrees with the blade. There is a specific time when you need to place the wood at any other angle with the blade.

Bevel cut on a table saw

This is called a bevel cut, using different angles when dealing with the cutting process. When designing a new furniture product or adding some designs to the surface, you may need to deal with this process.

Now, you have what a bevel cut is and are ready to learn to follow some steps to cutting a wood piece. Here is what you need to keep in your mind.

How to Cut a 60 Degree Bevel on a Table Saw?

table saw is one of the most used instruments to cut wood or design furniture. If you want better outcomes from your woodworking process, you must follow the upcoming instructions. It will make the process simple and easy if you use the following method.

1. Do some mathematics

Before you get to work, you need to do some mathematics. It is because you can’t cut a 60-degree angle using a table saw by placing it at an angle of 90 degrees. So, you must ensure that the instrument’s placement is perfect for cutting the wood from your desired point and getting the exact position.

Angle of the table saw for bevel cut

Multiple angles will keep changing with the angle of the slope. But in this case, you must subtract 45 from 60 to get the required angle to place the blade. This mathematics is pretty simple, but you may need to adopt other techniques to find an angle in other bevel-cutting angles.

2. Choosing the right blade

After finding the required angle, you must pick and adjust the right blade. Yes, you have to choose the right blade per the wood’s requirements. It directly depends on the hardness and other properties of the wood.

Right blade for table saw

For this task, you should know the type of wood. It will give you an overview of the material’s properties. Now, you can easily choose the blade per the material’s requirements. Another important thing you can keep in mind is the blade size, as you must place it on the top for smooth cutting.

Also read about How a raised panel door could be made on a table saw

3. Place the wood

Now, placing the wood against the blade teeth comes to the list. It is an important step because you have to focus on getting your desired wood shape at the end of the process. If you have not placed the piece of wood properly, it will neither cut it properly nor give it your desired shape.

Also, look at the saw you are using to cut it down. It is because different types of saws will give a different shape to the wood piece. You should use two pieces of wood adjacent to the required wood piece for perfect placement. It will keep the piece stable and provide a safe position to start the cutting process.

Cutting wood in table saw

Another important thing to do before cutting is to place the blade. You can’t cut the wood with the blade placed at the bottom of the piece. It is because the blade cannot move and cut the piece.

So, you have to raise the blade to the top of the wood. It is the foremost process you must do after placing the wood. For this task, you can use the knob given just beside the blade teeth. You only have to keep an eye on the position and raise it properly unless the top of the blade is a little higher than the top position of the wood.

4. Start cutting

Once you have placed the wood, you can start cutting it with a table saw. It will take up to a few minutes if you have adopted the above steps. Also, it would be best if you kept pushing the wood with the supporting pieces.

The reason is the smooth cutting of the wooden piece gives it a better shape. It would be best if you also controlled the blades working with the switch to turn it off whenever you need to do this or change the direction of the wood.

By doing this, you will be able to get your desired shape from the wood piece or sheet at the end of the process.

Precautionary Measures for How to Cut a 60 Degree Bevel on a Table Saw

Before you cut the wood or any other material using your table saw, you must adopt some preventive measures. Here are some precautions that you have to keep in your mind.

Precautionary Measures for Cut a Bevel on a Table Saw
  • Wear eye-protective
  • Use the mask to cover your face
  • Keep your hands at a suitable distance from the blades
  • Keep your focused on the cutting process
  • Use strong supportive wood pieces for smooth cutting

Final Wrapping

The above discussion taught you how to cut a 60 degree bevel on a table saw. If you want to get the expected results, you should keep these steps in mind. Also, it would help if you were careful while cutting because a minor mistake can cut your fingers or hand. So, losing attention from the process will be harmful no matter how much experience you have.

Kenneth Wafer Woodnami

Kenneth Wafer is an aspiring woodworking expert from Los Angeles. He loves reading and writing about all the best woodworking tools and accessories available in the market.
He is a Finance professional and recently completed his foundation course from CFA Institute, USA.

Leave a Comment